Decorative Window Heads & Label Mouldings

Plain Head	A	B
PH1 PH2 PH3	140 215 290	100 100 100

Chamfered Head	A	B
CH1 CH2 CH3	140 215 290	100 100 100

Splayed Window Head	A	B	C
SH1 SH2 SH3	140 215 290	100 100 100	30 30 30

Projecting Keystone Head	A	B	C	D	E	F	G
KH1/140 KH1/215	140 215	100 100	30 30	200 300	140 150	215 290	110 110

Please note can be manufactured with a Chamfered keystone or with splayed ends (as drawing) as required.

Chamfered Projecting Keystone Head	A	B	C	D	E	F	G
CKH1/140 CKH1/215	140 215	100 100	30 30	200 300	140 150	215 290	110 110

Please note can be manufactured with a Chamfered keystone or with splayed ends (as drawing) as required.

Flush Keystone Head	A	B	C	D	E
FH1 FH2	215 290	100 100	118 118	200 300	140 150

• Unit lengths are variable to suit customer requirements.
• Other designs can be made to order.
• Usual bearings 102.5 or 150mm or to suit Jambs, if used.
• All dimensions are shown in mm.
• Decorative Heads are generally manufactured up to a maximum length of 1500mm. Sizes greater than this are made in two or more pieces.
• Decorative Heads should be used in conjunction with a suitable load-bearing lintel.

Label Moulding	A	B	C	D	E	F	G
M1 M2	140 140	65 65	100 100	15 15	140 215	- -	- -

• Units are normally supplied in lengths of 600mm and are required to be cut to length on site.

<< Back